Protective film: the metal tag has a protective cover in the front and back surface, easy to be peeled off, and will leave a very nice, clean and scratch-free surface for stamping into. Sturdy quality: the blank metal tags are made of aluminum, with a good polish have a luster similar to sterling silver, lightweight and easy to use, take a stamp clearly and easily, will not be easily bent.
You will receive: aluminum stamping blank tags are in 50, pointed edges, which will meet your various needs; Note: metal products, 100, 150 pieces for you to choose, please use with caution. Wide applications: round metal key tags are great for making sign, jewelry diy, charms, pendant, dangles, or you could also use them as necklaces, pendants, bracelets and more.
Features: large quantity: a large amount round stamping blanks for you to use, it stays bright and shiny for years of long wear. Good material: made of aluminum material, textured, use them as charms, bright silver color, you can stamp them, stamped, the front and back wiredrawing process with protective film, dangles, inked, also can be hammered, or you could also use them as bails, pierced and so on.
Range of uses: the stamping blank tags are good for making sign, can be written or engraved text patterns for decoration, or hang the stamping charms to your personalized bracelet, the surface is blank, jewelry diy, pendant, necklace or earrings.
ImpressArt 1 Pound Metal Stamping Hammer
Impressart's brass 1 pound metal stamping hammer was designed for metal stamping. The 1 pound brass head is designed to prevent double impressions and protects your metal stamps so they'll last longer. Also works well with flattening wire for jewelry making. The brass head helps to extend the life of your metal stamps by reducing wear and tear throughout each hand stamping project.
Brass heads are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank. Please note that brass hammers may flake when striking however, this prolongs the life of the stamp by taking the most of the hammer blow! This prevents double impressions and also provides longevity to your stamps and steel punches.
Brass hammer head just under 1 pound in weight and the grip is roughly 7 inches long. Back side of the hammer head can be used as a ball peen for metal shaping, forming, and texturing. Scaled down grip and 1 pound brass head ensures that every strike is accurate, resulting in a professional jewelry or leather DIY project.
3MM - Basic Bridgette Letter & Number Metal Stamp Kit - Uppercase/Lowercase/Number - ImpressArt - 63 Piece Punch Set Complete Set of 3
Brass heads are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank. Simply wipe down with a dry paper towel or rag before using. Full set of 3 63 punches: metal stamping kit includes 1 uppercase letter set 1 lowercase letter set 1 number stamp set.
Size: the stamp heads are 3mm. Do not use on stainless steel. Please note that the sides of the stamps are not labeled with markings. The 1 pound head and grooved grip aids in striking metal stamps with the right amount of force, scaled down grip, every single time. With a smaller, it provides easy handling and precision striking.
Please note that brass hammers may flake when striking however, this prolongs the life of the stamp by taking the most of the hammer blow! The head is firmly attached to the handle.
ImpressArt Typewriter Font Metal Letter Stamps, 3mm Lowercase Steel Alphabet Punch Set
Size: 3mm stamps letters approximately 3mm tall. Metal lowercase letter stamp set Includes full alphabet a-z and question mark ? Constructed of solid steel, gold, these metal alphabet punches will stamp soft metals, silver, including brass, copper, nickel silver, and aluminum. The letters will naturally vary in size.
This prevents double impressions and also provides longevity to your stamps and steel punches. Brass hammer head just under 1 pound in weight and the grip is roughly 7 inches long. Back side of the hammer head can be used as a ball peen for metal shaping, forming, and texturing. The 1 pound head and grooved grip aids in striking metal stamps with the right amount of force, scaled down grip, every single time.
Use this alphabet punch set to stamp significant phases, and to permanently impress your message into any other metal stamping projects. In order to prevent rust, these stamp sets are lightly coated with oil. Simply wipe down with a dry paper towel or rag before using.
ImpressArt Metal Stamp Enamel Marker, Black Acrylic Ink
Please note that brass hammers may flake when striking however, this prolongs the life of the stamp by taking the most of the hammer blow! Each set includes storage case. Oil-coated to protect from rust - simply wipe down with a dry paper towel or rag before using. Size: 3mm stamps letters approximately 3mm tall.
Metal lowercase letter stamp set Includes full alphabet a-z and question mark ? Constructed of solid steel, these metal alphabet punches will stamp soft metals, silver, nickel silver, including brass, gold, copper, and aluminum. Simply wipe down with a dry paper towel or rag before using. Scaled down grip and 1 pound brass head ensures that every strike is accurate, resulting in a professional jewelry or leather DIY project.
Also works well with flattening wire for jewelry making. The brass head helps to extend the life of your metal stamps by reducing wear and tear throughout each hand stamping project.
ImpressArt Stamp Straight Tape
Do not use on stainless steel. Please note that the sides of the stamps are not labeled with markings. Simply wipe down with a dry paper towel or rag before using. Simply create a straight line with the top edge of the tape along your workpiece to create a guide. Please note that brass hammers may flake when striking however, this prolongs the life of the stamp by taking the most of the hammer blow!
Full set of 3 63 punches: metal stamping kit includes 1 uppercase letter set 1 lowercase letter set 1 number stamp set. Size: the stamp heads are 3mm. Stamp straight Tape allows precise accuracy when stamping letters on metal jewelry. Impressart's brass 1 pound metal stamping hammer was designed for metal stamping.
Each set includes storage case. Oil-coated to protect from rust - simply wipe down with a dry paper towel or rag before using. Size: 3mm stamps letters approximately 3mm tall.
ImpressArt- Whimsy Heart Design Stamp, 3mm
Also works well with flattening wire for jewelry making. The brass head helps to extend the life of your metal stamps by reducing wear and tear throughout each hand stamping project. Do not use on stainless steel. Please note that the sides of the stamps are not labeled with markings. Easy process, just allow 3-5 minutes for ink to dry and acrylic in will stay intact, within your hand stamped jewelry.
Mark stamping Blanks for Accurate Metal Stamping. Helps evenly Space Out Letters. For stamping soft metals including brass, copper, sterling silver, nickel silver, clay, aluminum as well as wood, gold, and matte board. Impression Size: 3mm. This prevents double impressions and also provides longevity to your stamps and steel punches.
Brass hammer head just under 1 pound in weight and the grip is roughly 7 inches long.
Beadsmith-Vintaj Steel Bench Block, 4 by 4 by 0.5-Inch
Avoid wiping with anything wet - water will cause stamps to rust. Stamp enamel fills-in metal stamped impressions by darkening with black acrylic ink pen. Use this alphabet punch set to stamp significant phases, and to permanently impress your message into any other metal stamping projects. In order to prevent rust, these stamp sets are lightly coated with oil.
The letters will naturally vary in size. The 1 pound head and grooved grip aids in striking metal stamps with the right amount of force, scaled down grip, every single time. The ideal surface for letter imprinting; riveting; texturing and hammering. Also works well with flattening wire for jewelry making. The brass head helps to extend the life of your metal stamps by reducing wear and tear throughout each hand stamping project.
With a smaller, it provides easy handling and precision striking.
HimaPro One Pound Brass Metal Stamping Hammer with a complimentary Stamp
Impression Size: 3mm. Brass heads are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank. This 1 pound brass hammer prevents your punch from double impressions and will help to achieve a clean and beautiful outcome. The sturdy and grooved grip allows for maximum force, precision strikes.
With a smaller, it provides easy handling and precision striking. Simply wipe down with a dry paper towel or rag before using. The 1 pound head and grooved grip aids in striking metal stamps with the right amount of force, scaled down grip, every single time. The ideal surface for letter imprinting; riveting; texturing and hammering.
Himapro brass stamping hammer is designed for metal stamping. Never mar your craft table again. Avoid wiping with anything wet - water will cause stamps to rust.
100 Pieces Metal Stamping Blanks Flat Round Washer with Center Hole for Bracelet Jewelry Making DIY Crafts
Impression Size: 3mm. The letters will naturally vary in size. Sturdy material: made of aluminum material, sturdy, durable and beautiful, good polish and glossy shine, which is durable and abrasion-resistant, formed integrally without any joint, can support you for long time use. Scaled down grip and 1 pound brass head ensures that every strike is accurate, resulting in a professional jewelry or leather DIY project.
The 1 pound head and grooved grip aids in striking metal stamps with the right amount of force, scaled down grip, every single time. Adding stamp enamel will highlight your stamped impressions for easy identification. Elevate your metal stamped jewelry by filling in your impressions for everyone to see! Contains one 4x4x1/2 inch Bench Block.
This prevents double impressions and also provides longevity to your stamps and steel punches. Brass hammer head just under 1 pound in weight and the grip is roughly 7 inches long. Back side of the hammer head can be used as a ball peen for metal shaping, forming, and texturing.
ImpressArt Metal Stamping Sticker Guides
Do not use on stainless steel. Please note that the sides of the stamps are not labeled with markings. Stamp guides makes it easy to space out letters, stamp in a straight line or a curve, and stamp Mandalas and other intricate patterns. The 1 pound head and grooved grip aids in striking metal stamps with the right amount of force, scaled down grip, every single time.
Never mar your craft table again. Please note that brass hammers may flake when striking however, this prolongs the life of the stamp by taking the most of the hammer blow! This hammer is great for the beginner and intermediate stamper. Stamp guides help align metal stamp letters properly when metal stamping.
Use this alphabet punch set to stamp significant phases, and to permanently impress your message into any other metal stamping projects. In order to prevent rust, these stamp sets are lightly coated with oil. To use the straight or circle guides, simply stick a guide to your blank, line up your stamp with the spacing line, and stamp along the top ridge.