Rheem 62-23543-01 Flame Sensor Rod for Rheem, Ruud and Weatherking Furnaces
Angle - sensor Offset Degrees: 90 Ordering notes: the gas code is the first two letters of the unit's serial number. Length - sensor offset Inches: 1-9/16. Termination: 1/4 Inch Male Quick Connect.
Protech 62-24164-01 Direct Spark Ignition Ignitor
Length - sensor offset Inches: 1-9/16. Termination: 1/4 Inch Male Quick Connect. Ignition Type: direct spark. Termination: 1/4 inch quick connect. Termination: 1/4 inch male quick connect. Length sensor offset: 1-9/16 inch. Protect and rheem product. Element material: kanthal. Length mounting flange to sensor tip: 2.
5 inch. Angle sensor offset degrees: 90 .
Duralight Furnace Ignitor Direct Replacement For Rheem Ruud Weatherking OEM Part 62-22868-93
Angle - sensor Offset Degrees: 90 Ordering notes: the gas code is the first two letters of the unit's serial number. Length - sensor offset Inches: 1-9/16. Termination: 1/4 Inch Male Quick Connect. Ignition Type: direct spark. Termination: 1/4 inch quick connect. Element material: kanthal. This ignitor replaces both the Norton 201 and 271 types used on Rheem, Ruud, and Weatherking furnaces.
If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Do not touch the grey ignitor portion with bare hands, the oil in your fingers can cause a "hot spot" and lead to premature failure. This part is covered by the exclusive Duralight two year limited replacement policy.
This silicon carbide hot surface ignitor replaces most applications on Rheem, Ruud, and Weatherking furnaces.
OEM Upgraded Replacement for Rheem Furnace Flame Sensor 62-23543-01 by Replacement for Rheem Original Version
This is a brand New Furnace Flame Sensor. This is a brand new furnace Flame Sensor Termination: 1/4 inch male quick connect. Length sensor offset: 1-9/16 inch. Made in USA. Element material: kanthal. Termination: 1/4 inch quick connect. When the flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety.
Exact fit with No Adapters or Wiring Changes Required. Length - mounting flange To Sensor Tip Inches: 2-1/2. Angle - sensor Offset Degrees: 90 Ordering notes: the gas code is the first two letters of the unit's serial number.
Protech 47-25349-02 Auto Reset Limit Switch
Technical data tod switch series: 36t category: general purpose reset mode. Direct replacement part for most rheem, ruud, & weatherking Furnaces With Hot Surface Ignitors - Will Not Fit "Drum" Heat Exchanger Type Furnaces. Rheem/protech 47-21711-16 - limit switch - auto reset board mount - rheem/ruud/protech - a complete line of oem and factory Replacement parts for your furnace; air conditioner; water heater; air handler; boiler; rooftop unit and more.
. 20 disc face: enclosed mounting: board mount - 90 degree strap angle mounting board. Termination: 1/4 inch quick connect. Technical data tod switch series: 36T category: general purpose reset mode: auto no. Of poles: 1 switch type: spst contact orientation: normally closed maximum voltage rating vac: 120/230 maximum current rating a: 15/10 open temperature F: 210 tolerance open temperature F: +/-7 close temperature F: 190 nominal temperature difference F: 20 disc face: enclosed mounting: board mount - 90 degree strap angle mounting board dimensions in.
1-7/8 x 2-3/4 mounting insertion depth - maximum in.
47-25349-01 - Rheem OEM Furnace 3" Replacement Limit Switch
This is a brand new oeM Furnace 3" Replacement Limit Switch. Direct replacement part for most rheem, ruud, & weatherking Furnaces With Hot Surface Ignitors - Will Not Fit "Drum" Heat Exchanger Type Furnaces. Exact fit with No Adapters or Wiring Changes Required. 20 disc face: enclosed mounting: board mount - 90 degree strap angle mounting board.
This is a brand new oem furnace 3" Replacement Limit Switch Termination: 1/4 inch male quick connect. Termination: 1/4 inch quick connect. Protect and rheem product. 3" insertion. Length sensor offset: 1-9/16 inch. When the flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety.
A complete line of oem and factory replacement parts for your furnace; air conditioner; water heater.
Rheem Ruud Weather King, RGP Mid Efficiency, Conquest 800 Furnace Draft Inducer Blower FB-RFB241
Length - mounting flange To Sensor Tip Inches: 2-1/2. Angle - sensor Offset Degrees: 90 Ordering notes: the gas code is the first two letters of the unit's serial number. Length - sensor offset Inches: 1-9/16. Termination: 1/4 Inch Male Quick Connect. Ignition Type: direct spark. Termination: 1/4 inch quick connect.
Top qualty oEM Replacement Part! Duralight Two Year Replacement Warranty. A complete line of oem and factory replacement parts for your furnace; air conditioner; water heater.
Protech 47-22861-02 Manual Reset Limit Switch
3" insertion. Angle sensor offset degrees: 90 Replaces part numbers 62-22441-01, 62-22868-82, 62-22868-92, 62-22868-01, 62-22868-93s, 62-22548-01, 62-22868-02, 62-23460-01, 62-22869-01, and 8553-5514. This is a brand New Furnace Flame Sensor. Top qualty oEM Replacement Part! Rheem/protech 47-100241-01 - limit switch - manual reset flanged airstream - rheem/ruud/protech - a complete line of oem and factory Replacement parts for your furnace; air conditioner; water heater; air handler; boiler; rooftop unit and more.
Direct replacement part for most rheem, ruud, & weatherking Furnaces With Hot Surface Ignitors - Will Not Fit "Drum" Heat Exchanger Type Furnaces. Technical data tod switch series: 36t category: general purpose reset mode. Technical data tod switch series: 36T category: general purpose reset mode: manual no.
Ball bearings, Metal Housing, Gasket. 1/20 hp, 1.
Duralight Furnace Flame Sensor Direct Replacement For Rheem Ruud Weatherking OEM Part 62-23543-01
Protect and rheem product. Length sensor offset: 1-9/16 inch. This part is covered by the exclusive Duralight two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement.
Direct replacement for rheem - ruud - weatherking - comfort Aire - Century Part Numbers 62-23543-01 and 62-23543-03. Top qualty oEM Replacement Part! It is designed to be compatible with the factory ignition systems and provide reliable operation. Termination: 1/4 inch male quick connect. Shaded pole motor, 3400 rPM, 1-Speed; CCW.
Exact fit with No Adapters or Wiring Changes Required. Direct replacement part for most rheem, ruud, & weatherking Furnaces With Hot Surface Ignitors - Will Not Fit "Drum" Heat Exchanger Type Furnaces.
Protech 47-22860-01 Auto Reset Limit Switch
3" insertion. No. Exact fit with No Adapters or Wiring Changes Required. Duralight Two Year Replacement Warranty. Protect and rheem product. When the flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety. Technical data tod switch series: 36t category: general purpose reset mode.
15/10 open temperature f: 190 tolerance open temperature F: +/-7 close temperature F: 170 nominal temperature difference F. Duralight Two Year Replacement Warranty. Restores Reliable Operation. Replaces part numbers 62-22441-01, 62-22868-82, 62-22868-02, 62-22868-93s, 62-22548-01, 62-23460-01, 62-22868-92, 62-22869-01, 62-22868-01, and 8553-5514.
This is a brand New Furnace Flame Sensor.