Min. Max. Please call 800-243-0340 immediately after placing your order, if you require any customizations. Indoor units automatically adjust their capacities up and down in real time and as needed to match the zone's cooling or heating loads. With 21. 3 seer efficiency. Pioneer brand multi split heat pump system, complete set.
Voltage: 208~230 volts, 1 phase standard household 2 line power, 60 hertz, l1-l2-g. Carefully see all available pictures, where a full specifications table is also provided. Please also visit high seer com web site for full technical specks and other documents provided. Systems can be customized for the indoor unit Capacity combination as well as the pipe kit lengths for each zone.
Pioneer Ductless Mini Split System Charging Vacuum Port Adapter Swivel Type, 5/16 Female, 1/4 Male SAE
E. Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Port adapter converts the 5/16" SAE ports to use with 1/4" SAE gauge sets.
Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser
Slight rearward tilt to wall is recommended for safety purposes. Universal heavy duty outdoor wall bracket. Used for supporting condensing units up to 350 pounds, this bracket features a crossbar that is attached to the wall, and two L-shaped support brackets that are hooked and bolted into place on the crossbar.
The condensing unit is mounted onto the L-shaped brackets, and fastened using the bolts and anti-vibration feet provided. See pictures for dimensions. Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. Please check to ensure clearance requirements are being met for your minisplit unit.
Dimensions: Width: 33. 5" height: 18" depth: 22". Used on most newer R410A Ductless Mini Split Systems. Fits 9000-36000 Btu Units.
PIONEER Air Conditioner Pioneer Mini Split Heat Pump Minisplit Heatpump 12000 BTU-208/230 V
For full technical specks and other Information, Please refer to the highseer web site. Requires 1/2 inch 12 mm bit. Ultra high efficiency inverter+ ductless mini split heat pump system. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs. Pioneer brand ways series ductless split heat pump systems come in a range of capacities; from 9000 BTU/hour to 36000 BTU/hour.
Voltage: 208~230 vac, 1 phase standard household 2 line power, 60 hertz, l1-l2-g. Please see the active links on this page for full specks, manuals, etc. Cloud programmable wireless Internet remote access function is also available. Pioneer newest ways series wall mount mini split ductless Inverter air conditioning and heat pump system.
Additionally, an automatic switchover mode is available for totally automatic operation through it's on board computer.
Pioneer Mounting Bracket for Mini Split Ductless Air Conditioner Condensing Unit. 2P for 9000 and 12000 BTU Condensers
Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting. 4 rubber vibration absorbers also included. 4 sizes to choose from. Heavy duty steel bracket, Made with ultra galvanized steel and Epoxy paint for installing mini split condensing units against the wall properly. Cooling power:12000 converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set.
Pick the bracket that fits the BTU output of your machine. Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils. Cooling capacity: 12, 000 btu/H with 17. 5 seer efficiency. Used on most newer R410A Ductless Mini Split Systems. Requires 1/2 inch 12 mm bit. Ultra high efficiency inverter+ ductless mini split heat pump system.
PIONEER Air Conditioner Pioneer Mini Split Heat Pump Minisplit Heatpump, 24000 BTU-208/230 V
Slight rearward tilt to wall is recommended for safety purposes. Free tech support and a 5 year coverage on the compressor. Used on most newer R410A Ductless Mini Split Systems. Anti-cold Air Function. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. Copper piping kit.
A cloud programmable wireless Internet remote access function is also available, sold separately. Dimensions: Width: 33. 5" height: 18" depth: 22". Additionally, an automatic switchover mode is available for totally automatic operation through its onboard computer. Universal heavy duty outdoor wall bracket. Voltage: 208~230 vac, 1 phase standard household 2 line power, 60 hertz, l1-l2-g.
GUYAAC 3" W 15ft L Air Conditioner Decorative PVC Line Cover Kit for Mini Split Air Conditioners and Heat Pumps Systems
Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting. 4 rubber vibration absorbers also included. 4 sizes to choose from. Fits 9000-36000 Btu Units. Product color - white paintable. Compatible : the product is suitable for mini-split systems with a capacity of 9000 BTU, 12000 BTU and approximately 18000 BTU.
Package included : duct×4, wall cover×1, coupling×3, vertical bending×1, free joint×1. As an alternative to ground level pads, vandalism, floods, snow, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, debris, etc. Cross bar, each arm has two upgraded 8.
8 grade bolts with lock nuts, wall fixation kit, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall. Slight rearward tilt to wall is recommended for safety purposes. It includes hardware and expansion bolts for wall mounting.
Refrigeration Technologies RT201B Nylog Gasket/Thread Sealant
Refrigeration technologies nylogâ" gasket thread sealant and assembly lube #rt201b. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. As an alternative to ground level pads, floods, debris, snow, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, vandalism, etc.
Cross bar, each arm has two upgraded 8. 8 grade bolts with lock nuts, wall fixation kit, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall. Slight rearward tilt to wall is recommended for safety purposes. Voltage: 208~230 vac, 60 hertz, 1 phase standard household 2 line power, l1-l2-g.
Please see the active links on this page for full specks, manuals, etc. Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
Outdoor Wall Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser
Universal design - galvanized steel and epoxy painted, support up to 350 lbs, Fits 16" wall mounting distance. Keep piping organized, clear up external wall for a professional installation appearance. Easy installation : infinite combinations of kit, any DIY work can make house appear chic. Accurate construction - advanced technics to ensure brackets are perpendicular to each other when condenser leveling.
The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. Requires 1/2 inch 12 mm bit. Ultra high efficiency inverter+ ductless mini split heat pump system. Heating capacity: 11, 800 BTU/H with 9. 0 hspf efficiency. Use for both cooling and heating: 24000 BTU/hour, with 17 SEER and 10 HSPF efficiency.
Ultra-silent and beautifully built: perfect for home or light commercial use.
PIONEER Air Conditioner Pioneer Mini Split Minisplit Heatpump 9000 BTU-110/120 V
Slight rearward tilt to wall is recommended for safety purposes. Heating capacity: 11, 800 BTU/H with 9. 0 hspf efficiency. Clean-cut : the refrigerant pipe is ingeniously contained with in and protected by the cover kit. Full system set, containing indoor section, outdoor section, remote controller and standard installation accessories.
Auto restart function memorizes all settings in case of a temporary power failure and restarts the system to continue running the same way after the power is reconnected. Ultra-silent and beautifully built: perfect for home or light commercial use. Additionally, an automatic switchover mode is available for totally automatic operation through it's on board computer.
Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Nylog-gasket/thread sealant. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs.
Diagnostic R12 R22 R134a R410A - BACOENG Vacuum Pump & Manifold Gauge Set - HVAC A/C Refrigeration Kit - w/Case
Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting. 4 rubber vibration absorbers also included. 4 sizes to choose from. Installation accessories : nylon expand plug and stainless steel screw×21, end cover×1, plane bending×1, nylon cable ties×8.
. Capable of adapting to any environments and temperatures from -4℉ to 140℉, it will not deform under any weather conditions. Comes with every needed component in the box, including an easy-install 16ft. Heating capacity: 11, 800 BTU/H with 9. 0 hspf efficiency. Accurate construction - advanced technics to ensure brackets are perpendicular to each other when condenser leveling.
Keep piping organized, clear up external wall for a professional installation appearance.