OTC 6766 Injector Harness Connector Release Tool for Ford 6.0L

#ad
OTC 6766 #ad - This terminal release tool is required for removal of the vehicle's injector wiring harness without causing damage to the component. Drivability issues comillimeteronly point to the Injector Pressure Regulator IPR and OTC has the timesaving tools you need to efficiently perform this service and get your customer’s vehicle back on the road.

Otc has the timesaving tools you need to efficiently perform this service. Drivability issues commonly point to the Injector Pressure Regulator IPR. This terminal release tool is required for removal of the vehicle feets injector wiring harness without causing damage to the component. Otc offers a new selection of service tools for Aftermarket professionals who service the Navistar 6.

OTC 6766 Injector Harness Connector Release Tool for Ford 6.0L #ad - 0l diesel engine found in many Ford "Power Stroke" platforms 2003 to 2007.

#ad



OTC 6594 Oil Line Disconnect Tool for Ford

#ad
OTC 6594 #ad - Metal construction for durability. Designed to disconnect high-pressure oil rail supply line from the fuel rail when removing the fuel injectors. This tool is used on the Ford 6. 0l diesel engine and is easy to use. Used on the ford 60L diesel engine and is easy to use. It has metal construction for durability and precise OEM design.

Spx otc oil line disconnect tool is designed to disconnect high-pressure oil rail supply line from the fuel rail when removing the fuel injectors.

#ad



OTC 6768 Glow Plug Release Tool

#ad
OTC 6768 #ad - Safely remove and install the glow plug harness on 2004 and newer Ford 6. 0l diesel engines. Metal construction for durability. Used on the ford 60L diesel engine and is easy to use. Otc glow plug release Tool for Select Ford Diesel Engines. Designed to disconnect high-pressure oil rail supply line from the fuel rail when removing the fuel injectors.

. Tool can be reshaped by user to work around the heater box clearance issues on select vehicles. For 2004 to 2009 ford 6. 0l diesel engines. Manufactured from heavy duty stamped and formed steel - coated to prevent corrosion. Designed to slip onto the harness caps to safely remove and install glow plug harnesses.

#ad



Red Hound Auto Compatible with Ford High Pressure Oil Line Tool Quick-Release Coupling Disconnect 6.0L & 4.5L Diesel HPOP Wrench

#ad
Red Hound Auto #ad - High pressure ford Oil Fuel Line Disconnect Tool 6. 0l 4. 5l quick release designed to disconnect high-pressure oil rail supply line from the fuel rail when removing the fuel injectors. Otc glow plug release Tool for Select Ford Diesel Engines. Tool can be reshaped by user to work around the heater box clearance issues on select vehicles.

6. 0l, 4. 5l; fuel line disconnect Tool Will Speed up the time it takes to remove injectors. Offset head allow oil rail Supply Line to be Disconnected From Fuel Rail. Designed to slip onto the harness caps to safely remove and install glow plug harnesses. Used on the ford 60L diesel engine and is easy to use. Manufactured from premium materials.

Red Hound Auto Compatible with Ford High Pressure Oil Line Tool Quick-Release Coupling Disconnect 6.0L & 4.5L Diesel HPOP Wrench #ad - Metal construction for durability. Also good for disconnecting the turbo oil feed line & the under-valve cover oil rails that feed the injectors. You can buy the tool and have it removed in1-2 minutes, or fight it for days using the old 2 screwdriver prybar need 3 hands trick. Manufactured from heavy duty stamped and formed steel - coated to prevent corrosion.

For 2004 to 2009 ford 6. 0l diesel engines.

#ad



Lisle 68210 IPR Socket for Ford Diesel

#ad
Lisle 68210 #ad - The tool is built to bottom out on the regulator hex so it does not put torque on the connector in case the regulator can be reused. Used to remove and replace the Injector Pressure Regulator IPR on Ford 6. 0l, international and Other Diesel Engines. This regulator is located in a very tight location. It does not put torque on the connector in case it can be reused.

Offset head allow oil rail Supply Line to be Disconnected From Fuel Rail. For 2004 to 2009 ford 6. 0l diesel engines. Use with 3/8 inch square drive. Tool can be reshaped by user to work around the heater box clearance issues on select vehicles. Designed to disconnect high-pressure oil rail supply line from the fuel rail when removing the fuel injectors.

Lisle 68210 IPR Socket for Ford Diesel #ad - Metal construction for durability. Used on the ford 60L diesel engine and is easy to use. Designed to slip onto the harness caps to safely remove and install glow plug harnesses. Manufactured from premium materials. You can buy the tool and have it removed in1-2 minutes, or fight it for days using the old 2 screwdriver prybar need 3 hands trick.

Use with 3/8" square drive.

#ad



6.0L Ford Powerstroke High Pressure Oil Rail Special Tool Socket for Ball Tube Removal 2003-2007

#ad
FGT Motorsport #ad - Offset head allow oil rail Supply Line to be Disconnected From Fuel Rail. It does not put torque on the connector in case it can be reused. Metal construction for durability. If you are experiencing failure of the high pressure oil inlet o-ring then chances are that your ball tube o-ring seals have gone bad.

Our socket works with any standard 23mm socket and can easily remove and install all the high pressure oil ball tubes in minutes! Works on 2003-2007 Ford 6. 0l powerstroke engines. Also good for disconnecting the turbo oil feed line & the under-valve cover oil rails that feed the injectors. 6. 0l, 4. 5l; fuel line disconnect Tool Will Speed up the time it takes to remove injectors.

6.0L Ford Powerstroke High Pressure Oil Rail Special Tool Socket for Ball Tube Removal 2003-2007 #ad - Manufactured from premium materials. Otc glow plug release Tool for Select Ford Diesel Engines. This tool is a must have for replacing High Pressure Oil Rail Ball Tubes. Works on 2003-2007 ford 6. 0l powerstroke. If you are experiencing failure of the high pressure oil inlet o-ring then chances are that your ball tube o-ring seals have gone bad.

You can buy the tool and have it removed in1-2 minutes, or fight it for days using the old 2 screwdriver prybar need 3 hands trick.

#ad



APDTY 133900 Glow Plug Wire Wiring Harness Rubber Boot Release Pull Puller Removal Tool Used On Ford Expedition Super Duty Pickup 6.0L Diesel Engine

#ad
APDTY #ad - You can buy the tool and have it removed in1-2 minutes, or fight it for days using the old 2 screwdriver prybar need 3 hands trick. Used on the ford 60L diesel engine and is easy to use. Factory oem fit Form And Function. Offset head allow oil rail Supply Line to be Disconnected From Fuel Rail. Brand new glow plug harness Removal Tool Used On Ford 6.

0l diesel enginesee apdty 112728, 015564, 015539 for new glow plug Wiring Harnesses Designed to disconnect high-pressure oil rail supply line from the fuel rail when removing the fuel injectors. Otc glow plug release Tool for Select Ford Diesel Engines. It does not put torque on the connector in case it can be reused.

APDTY 133900 Glow Plug Wire Wiring Harness Rubber Boot Release Pull Puller Removal Tool Used On Ford Expedition Super Duty Pickup 6.0L Diesel Engine #ad - . This tool is a must have for replacing High Pressure Oil Rail Ball Tubes. Works on 2003-2007 ford 6. 0l powerstroke. If you are experiencing failure of the high pressure oil inlet o-ring then chances are that your ball tube o-ring seals have gone bad. Also good for disconnecting the turbo oil feed line & the under-valve cover oil rails that feed the injectors.

Designed to slip onto the harness caps to safely remove and install glow plug harnesses. 6.

#ad



FGT 6395 Glow Plug Release Removal Tool for Ford 6.0L Diesel

#ad
FGT Motorsport #NA #ad - Designed to disconnect high-pressure oil rail supply line from the fuel rail when removing the fuel injectors. Also good for disconnecting the turbo oil feed line & the under-valve cover oil rails that feed the injectors. 6. 0l, 4. 5l; fuel line disconnect Tool Will Speed up the time it takes to remove injectors.

Use this tool to remove the glow plug harness safely on Ford Diesel 6. 0l engines, 2004-2009. Made from hardened steel and black oxide coated for protection. Tool can be bent for removing the passenger side harness near the A/C evaporator box. This tool is essential for removing the glow plug harness without damaging the plastic on the glow plug connection.

FGT 6395 Glow Plug Release Removal Tool for Ford 6.0L Diesel #ad - Manufactured from heavy duty stamped and formed steel - coated to prevent corrosion. It does not put torque on the connector in case it can be reused. Designed to slip onto the harness caps to safely remove and install glow plug harnesses. Use this hardened steel release tool to safely remove the glow plug harness on Ford 6.

0l diesel engines, 2004-2009. You can buy the tool and have it removed in1-2 minutes, or fight it for days using the old 2 screwdriver prybar need 3 hands trick. Otc glow plug release Tool for Select Ford Diesel Engines.

#ad



OTC Tools 7481 Supply Tube Removal Tool

#ad
OTC Tools 7481 #ad - Otc glow plug release Tool for Select Ford Diesel Engines. Tool can be reshaped by user to work around the heater box clearance issues on select vehicles. Offset head allow oil rail Supply Line to be Disconnected From Fuel Rail. Similar to 303-1164. Use this tool to remove the glow plug harness safely on Ford Diesel 6.

0l engines, 2004-2009. Made from hardened steel and black oxide coated for protection. Tool can be bent for removing the passenger side harness near the A/C evaporator box. This tool is essential for removing the glow plug harness without damaging the plastic on the glow plug connection. Removes the high pressure fuel supply tube.

OTC Tools 7481 Supply Tube Removal Tool #ad - For 2004 to 2009 ford 6. 0l diesel engines. Used on the ford 60L diesel engine and is easy to use. Use with 3/8 inch square drive. Factory oem fit Form And Function. Fits ford 6. 0l diesel engines, 2003-2010 It does not put torque on the connector in case it can be reused.

#ad



OTC 6763 High Pressure Fuel Rail Adapters for Ford 6.0L

#ad
OTC 6763 #ad - For 2004 to 2009 ford 6. 0l diesel engines. You can buy the tool and have it removed in1-2 minutes, or fight it for days using the old 2 screwdriver prybar need 3 hands trick. Designed to disconnect high-pressure oil rail supply line from the fuel rail when removing the fuel injectors. Otc glow plug release Tool for Select Ford Diesel Engines.

Used on the ford 60L diesel engine and is easy to use. Fuel line connection changed in 2004. Tool can be reshaped by user to work around the heater box clearance issues on select vehicles. Designed to slip onto the harness caps to safely remove and install glow plug harnesses. Instead of replacing the entire oil rail at an incredibly high expense, use this special socket to remove the oil ball tubes and replace the o-rings at a fraction of the cost.

OTC 6763 High Pressure Fuel Rail Adapters for Ford 6.0L #ad - Made from high strength steel and black oxide coated to last for repeated use. Can be used with a 23mm socket for easy removal and installation. Meets or exceeds OEM Specs. Use with 3/8 inch square drive. Fits ford 6. 0l diesel engines, 2003-2010 Similar to 303-1164.

#ad



Genuine Ford 6E7Z-9A332-B Fuel Supply Tube

#ad
Ford 6E7Z-9A332-B #ad - Manufactured from heavy duty stamped and formed steel - coated to prevent corrosion. For 2004 to 2009 ford 6. 0l diesel engines. Best in quality. This is not an aftermarket part. Ford 6e7z-9a332-b designed to disconnect high-pressure oil rail supply line from the fuel rail when removing the fuel injectors. Also good for disconnecting the turbo oil feed line & the under-valve cover oil rails that feed the injectors.

Use with 3/8 inch square drive. Pair of high pressure fuel rail adapters. It does not put torque on the connector in case it can be reused. Instead of replacing the entire oil rail at an incredibly high expense, use this special socket to remove the oil ball tubes and replace the o-rings at a fraction of the cost.

Genuine Ford 6E7Z-9A332-B Fuel Supply Tube #ad - Made from high strength steel and black oxide coated to last for repeated use. Can be used with a 23mm socket for easy removal and installation. Meets or exceeds OEM Specs. The two adapters give you the capability to address either platform for pressure testing. This tool is a must have for replacing High Pressure Oil Rail Ball Tubes.

Works on 2003-2007 ford 6. 0l powerstroke.

#ad