MG Chemicals Super Corona Dope, 55 ml Liquid Bottle

20 astm dry time 25 degree Cminutes. 35 +/- 1 percent non-volatiles. Clear color. 105 cps viscosity Brookfield, 25 degree C. Xylol thinner. Excellent arc and corona resisting properties. Protects against moisture and oxidation. 15-30 seconds viscosity Demmler #1, 25 degree C. Protects motor windings and coils from arcing and discharge.

. 40 degree c -40 degree f to 180 degree C 356 degree F Operating temperature. Modified alkyd type. Useful for high voltage applications. Insulates components circuits and assemblies. Stored at 25 degree C in a dry condition. Insulates components circuits and assemblies. 0916 - 0936 specific gravity. 3000 v/mil at 2.

0 mils thickness, dielectric strength, after water immersion. Protects against moisture and oxidation. 4100 v/mil at 2. 0 mils thickness dielectrics strength, heat cured.


MG Chemicals 4228-55ML Red Insulating Varnish, 55 mL Bottle

85+/- 0 Viscosity: 40-55 seconds at 25 degree C. 2 pounds per gallon. 06+/- 0 Tack free time: 10 minutes at room temperature. 8 +/- 2. Dielectric strength dry: 3000 V/mil. Insulation class h - Suitable for service up to 180 °C. Thinner: Xylol. High gloss. 28 pounds per gallon. Recommended dry film thickness: 1. Gloss 60 degree : 80+.

Percent non volatile by weight: 51. Application: Spray or dip. 0 percent. 2 grams per milliliters or 8. 8 +/- 2. Coverage at 1. 0 mil. Insulation class h - Suitable for service up to 180 °C. High dielectric strength - 3 000 V/mil dry; 1 500 V/mil wet. Mg chemicals 4228 Red GLPT insulating varnish. 0 ml dft: 655 square feet per gallon.

Volatile organic compounds VOC: 4. High dielectric strength.


MG Chemicals 422B Silicone Modified Conformal Coating, 55 ml Bottle

8309 liquid or 8310A Gel stripper formulations. For spraying, liquid can be thinned using M. G. It is essential that surfaces be free of any trace of grease or organic substances. Fluoresces under UV-A light blacklight. Best results will be obtained by applying to thoroughly cleaned and dried parts or materials.

Silicone conformal coating 422b is a flexible finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock. Heat curing will improve the physical strength of this coating. Ideal for high temperature environments. Excellent finish-tough, flexible, glossy, and durable red coat.

Good adhesion and good water and salt water resistance. Maximum constant service temperature of 200 °C 392 °F. No. Thin up to one half part thinner to one part coating. Rohs compliant. Protects and Insulates various electric parts against arc and corona. It protects and insulates electrical and electronic components and assemblies, motors, including generators, relays, transformers, and solenoid coils.

Insulation class h - Suitable for service up to 180 °C.


MG Chemicals 4223-55ML Urethane Conformal Coating, 55 ml Bottle

It protects and insulates electrical and electronic components and assemblies, motors, relays, transformers, including generators, and solenoid coils. For spraying, liquid can be thinned using M. G. Protects and Insulates various electric parts against arc and corona. It protects and insulates electrical and electronic components and assemblies, including generators, motors, relays, transformers, and solenoid coils.

Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK. 435 thinner Cleaner Solvent. For spraying, liquid can be thinned using M. G. Viscosity, dolph viscosimeter at 30 degree C 86 degree F, 40 -50 sec. Thin up to one half part thinner to one part coating. 094 g/ml specific gravity at 21 degree C 70 degree F, ASTM D-287.

Excellent finish-tough, flexible, glossy, and durable red coat. Good adhesion and good water and salt water resistance. Urethane conformal coating is a durable finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock. Certified ul 94 v-0 file# E203094.




High Conductivity, 10 min Working time, 14 g, 2 Dispeners - MG Chemicals 8331 Silver Epoxy Adhesive

Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK. Urethane conformal coating is a durable finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock.

It also provides protection against electromagnetic EMI and radio frequency RFI interference. Ideal for extreme chemical conditions. Easy rework and repairs: solder through the coating or remove with MG Cat. The company, canada, bc, founded in 1955 and headquartered in Surrey, meets International Organization for Standardization ISO standard 9001.

What's in the box?14 g of 8331 silver conductive epoxy adhesive in two syringes 7-g syringe of part A and 7-g syringe of part B Protects and Insulates various electric parts against arc and corona. Two-part silver-filled epoxy adhesive with good conductivity and faster working time than MG Chemicals 8331S adhesive to bond electronic devices, form conductivity seals, and cold solder heat-sensitive materials.

Thinner cleaner; Comes with Easy Brush Cap applicator. Excellent finish-tough, glossy, flexible, and durable red coat. Good adhesion and good water and salt water resistance. Stores and ships at room temperature, no freezing or dry ice required.


Insulating Varnish, Clear, 15.25 oz.

8309 liquid or 8310A Gel stripper formulations. Continuous service temperature range from -55 to 150°C -67 to +302°F. No. Urethane conformal coating is a durable finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock. Maximum constant service temperature of 200 °C 392 °F.

High dielectric strength - 3 000 V/mil dry; 1 500 V/mil wet. Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK. Insulation class h - Suitable for service up to 180 °C. Excellent finish-tough, flexible, glossy, and durable red coat.

Good adhesion and good water and salt water resistance. Thinner cleaner; Comes with Easy Brush Cap applicator. Provides work time of 10 minutes and has full cure time of 5 hours at 77 degrees F. Stores and ships at room temperature, no freezing or dry ice required. Coverage: 15 to 20 sq. Item: insulating varnish application Temperature: 70 to 90 Degrees F VOC Content: 0

633 country of origin subject to change: United States.


Micsoa BNC Test Leads Set, Oscilloscope Probes BNC to Alligator Clips, BNC to Mini Test Clips, BNC to BNC Cable Leads 3 Pack

Ideal for extreme chemical conditions. Provides work time of 10 minutes and has full cure time of 5 hours at 77 degrees F. These test leads are very useful in a lab environment for all your testing needs. Keep this handy lead on hand for your next electronics project. Such as Oscilloscopes, etc. Heat cure is recommended to get the best possible conductivity.

Size: 15. 25 oz. Thin up to one half part thinner to one part coating. Bnc to alligator clips √test and laboratory interconnections √Converts BNC male cables / connectors to alligator clips for test versatility. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK. Protects and Insulates various electric parts against arc and corona.

Bnc connector is molded directly to the wire for pull strength durability and dust and moisture resistance. Certified ul 94 v-0 file# E203094. Oz. Thinner cleaner; Comes with Easy Brush Cap applicator. Two-part silver-filled epoxy adhesive with good conductivity and faster working time than MG Chemicals 8331S adhesive to bond electronic devices, form conductivity seals, and cold solder heat-sensitive materials.

.


CAIG Laboratories D100L-25C Contact Cleaner

Provides work time of 10 minutes and has full cure time of 5 hours at 77 degrees F. Certified ul 94 v-0 file# E203094. Caig laboratories d100l-25c contact cleaner Protects and Insulates various electric parts against arc and corona. Coverage: 15 to 20 sq. Standards: osha color: clear dry time: 2 to 4 hr. Caig laboratories d100l-25c 25ml contact Cleaner.

Ft. Item: insulating varnish application Temperature: 70 to 90 Degrees F VOC Content: 0633 country of origin subject to change: United States. Maximum constant service temperature of 200 °C 392 °F. Insulation class h - Suitable for service up to 180 °C. High dielectric strength - 3 000 V/mil dry; 1 500 V/mil wet.

Easy 1:1 mix ratio. It protects and insulates electrical and electronic components and assemblies, motors, transformers, relays, including generators, and solenoid coils. For spraying, liquid can be thinned using M. G. Heat cure is recommended to get the best possible conductivity. Easy rework and repairs: solder through the coating or remove with MG Cat.




Sumnacon 5pcs Banana to Banana Plug Test Lead Set, 4mm Stackable Banana Plug Wire Soft Silicone Test Cable Lead for Multimeter, 1m Silicone Electrical Test Wire 1000V/15A

Ideal for testing work in labs, signal generators, service shops, schools, video surveillance, home and industry. Fast acting deoxidizing solution. Fluoresces under UV-A light blacklight. They are fine for basic electrical testing for things like automotive accessories, vintage cars, etc, trucks and motorcycle, as long as whatever you are testing uses a fuse of 15 amps or smaller.

Lead wire is nicely molded into the banana housing - banana plug can rotate independent of the housing - Insulation allows easy sliding and no tangling, and is very robust - Banana Plug Test Lead cable can be used in electrical or laboratory electric testing work. Expand testing capability - converts BNC male cables / connectors to mini test clips/ alligator clips for test versatility and capability.

Easy rework and repairs: solder through the coating or remove with MG Cat. Item: insulating varnish application Temperature: 70 to 90 Degrees F VOC Content: 0633 country of origin subject to change: United States. Size: 15. 25 oz. Every electronic techie out there should have these cables. Sturdy banana plugs and the silicone insulation greatly enhance durability and flexibility of the leads that prevents the "memory" characteristic of plastic insulation after it has been rolled/wrapped for a period of time.

Continuous service temperature range from -55 to 150°C -67 to +302°F.


Heat-Set Insert Installation tip for #4-40, M3, and M5 Inserts Compatible with Hakko FX-888D and Weller Irons with ST Series Tips. Used for Connecting 3D Printed Parts.

Silicone wires are very soft, very nice to work with. The original long shank tip. Not tested with every possible soldering iron. Two tips included, one for #4-40 and M3 and the other for M5 inserts. Certified ul 94 v-0 file# E203094. It protects and insulates electrical and electronic components and assemblies, motors, including generators, relays, transformers, and solenoid coils.

For spraying, liquid can be thinned using M. G. Longer shank than other tips allows you to reach deeper into 3D printed parts and tight corners to install heat-set inserts without touching your iron and melting the plastic. If you use the "horizontal method" it's hard to know the insert is straight. No. Designed and manufactured in the USA.

They are silicone test lead cables. For weller wes51 et-series tips, see https://www. Amazon. Com/dp/b07gnx86BB. Excellent finish-tough, flexible, glossy, and durable red coat. Good adhesion and good water and salt water resistance.


Crimping Tool Kit, Preciva Dupont Ratcheting Crimper Plier Set with 1550PCS 2.54mm Dupont Connectors and 460pcs 2.54mm JST-XH Connectors for AWG 26-180.1-1mm²

Insulation class h - Suitable for service up to 180 °C. These banana plugs leads are stackable. Electrical resistivity: 0007 Ω·cm, thermal conductivity: 1. 4 w/m·K. Such as Oscilloscopes, etc. Soldering iron not included. Precise and perfect workmanship: this terminal crimping tool is produced with a wire-electrode cutting die set.

Ft. Installation tip works better than soldering iron tip since conical tips can catch on the insert and accidentally pull the insert out while melting the plastic and ruining the part. One tip works for #4-40 and m3 and the other tip works for m5 inserts for same price as a single tip from other vendors.

It protects and insulates electrical and electronic components and assemblies, transformers, including generators, relays, motors, and solenoid coils. For spraying, liquid can be thinned using M. G. Good quality leads that work great for moderate to low current testing. A must-have for every 3D printer toolbox.

Thin up to one half part thinner to one part coating. Plugs fit well into other leads and tests sockets. These are useful little leads for all sorts of electrical and electronic work.