MG Chemicals 409B Electrosolve Zero Residue Contact Cleaner, 340g 12 oz Aerosol Can

Dissolves oils and residues. It cleans connectors, microprocessors, circuit breakers, contacts, and LED and PCB components. It is effective at dissolving oils and non-polar residues, and for assisting with the removal of oxidation using a brush. Non-conductive. Suitable for use in food facilities as a Non-Food Chemical-Canadian and NFS recognition letters available on request.

Safe on most plastics. Zero residue, Fast evaporation rate. The 409b electrosolve Contact Cleaner is a very fast drying and zero residue contact cleaner. Applications: electrical and electronics contact cleaner that is safe on plastics and residue free.

MG Chemicals 404B Contact Cleaner with Electronic Grade Silicones, 340g 12 oz Aerosol Can

Applications: electrical and electronics contact cleaner that leaves a protective layer against corrosion. The silicone provides lubrication, preventing wear and tear, as well as a layer of protection from oxidation and the elements. Maximum service temperature of 200 ºC 392 ºF. Safe on most plastics. As well, the dry lubrication makes it better for dusty environments than mineral oil alternatives.

The 404b electronics contact Cleaner with Silicone is a very fast drying contact cleaner. It is a plastic-safe solvent cleaner that leaves a thin film of dry electronic grade silicone behind. Suitable for use in food facilities as a Non-Food Chemical-Canadian and NFS recognition letters available on request.

Fast evaporation rate. Non-conductive. The solvent system effectively dissolves oil and organic residues.

MG Chemicals 824 99.9% Isopropyl Alcohol Electronics Cleaner, 16 oz Aerosol Spray

Safe on most plastics. Low toxicity. 99. 9 percent pure anhydrous. Suitable for use in food facilities as a Non-Food Chemical-Canadian and NFS recognition letters available on request. Rohs Compliant. Complies to california Air Resource Board VOC limits for electronics cleaners. General all-purpose cleaner. Safe on plastics.

Perfect for use on fiber optics. Fast evaporation rate. Maximum service temperature of 200 ºC 392 ºF. 99. 953 percent pure anhydrous. Non-conductive. General all-purpose cleaner in aerosol form. Size: 16oz Aerosol. For use on: connectors and contacts, light oils, relays, semi-conductors, office and medical equipment, printed circuit boards, fiber optics, tape heads, flux.

Applications: electrical and electronics contact cleaner that leaves a protective layer against corrosion. Safe on plastics.

MG Chemicals 406B Superwash Electronics Cleaner, 425g 15 oz Aerosol Can

Maximum service temperature of 200 ºC 392 ºF. Fast evaporation rate. Cleans and degreases printed circuit boards, machinery, electrical and electronic devices. General all-purpose cleaner. Suitable for use in food facilities as a Non-Food Chemical-Canadian and NFS recognition letters available on request. Safe on most plastics.

99. 9 percent pure anhydrous. Dissolves oils and residues. When used as a secondary rinse, it accelerates the drying time of boards treated with slower drying cleaners. Zero residue, Fast evaporation rate. Safe on most plastics. Applications: Flux and contaminant remover for printed circuit boards. Non-conductive. Safe on plastics.

The 406b super wash electronics Cleaner is a very fast drying and zero residue cleaner degreaser for PC boards. Suitable for use in food facilities as a Non-Food Chemical-Canadian and NFS recognition letters available on request. Non-conductive. Great for dissolving many types of flux.

MG Chemicals 401B Nutrol Control Cleaner, 340g 12 oz Aerosol Can

Safe on most plastics. Non-aggressive - safe for use on vintage electronics. Static free, safe on most plastics. Maximum service temperature of 200 ºC 392 ºF. Perfect for use on fiber optics. Dissolves oils and residues. Fast evaporation rate. Applications: electrical and electronics contact cleaner that leaves a protective layer against corrosion.

Non-conductive. 100 percent ozone safe, fast dry. The 401b nu-trol control cleaner for electronics is a unique blend of high purity solvents and a lubricating mineral oil that is excellent for cleaning and lubricating delicate moving parts in electronics. The solvent system also effectively dissolves oil and organic residues.

Contains electronic grade mineral oil. Suitable for use in food facilities as a Non-Food Chemical-Canadian and NFS recognition letters available on request. Zero residue, Fast evaporation rate. Use for cleaning and lubricating electronic controls dials, tuners, switches, potentiometers, etc. Applications: Flux and contaminant remover for printed circuit boards.

General all-purpose cleaner. Nsf - nonfood compounds program Listed K2, Nsf Registration #144075.

MG Chemicals 801B Super Contact Cleaner with PPE, 4.5 oz Aerosol

Plastic safe-compatible with most sensitive substrate used in electronic parts and enclosures. Dissolves oils and residues. Low toxicity. Applications: electrical and electronics contact cleaner that is safe on plastics that leaves a protective anticorrosion layer. 100 percent ozone safe, fast dry. It also bonds onto the surface of metals and is particularly effective on gold, protecting gold contacts for life.

Non-aggressive - safe for use on vintage electronics. Static free, safe on most plastics. 99. 9 percent pure anhydrous. Applications: electrical and electronics contact cleaner that leaves a protective layer against corrosion. Fast evaporation rate. Improves conductivity. Contains electronic grade mineral oil. Applications: cleaner for electronic controls dials, switches, potentiometers, tuners, etc.

Protects gold for life. The 801b super contact cleaner with PPE polyphenyl ether cleans, lubricates, and protects. Nsf - nonfood compounds program Listed K2, Nsf Registration #144075. It contains a slow drying, plastic safe solvent that removes stubborn residues.

MG Chemicals 413B Heavy Duty Flux Remover, 425g 15 oz Aerosol Can

Dissolves oils and residues. Applications: Flux and contaminant remover for printed circuit boards. Safe on plastics. Quickly dissolves burnt on flux. It can also work aggressively on isolated and hard to reach areas requiring spot cleaning. Non-conductive. Non-conductive. Applications: Flux and contaminant remover for printed circuit boards.

Plastic safe-compatible with most sensitive substrate used in electronic parts and enclosures. Fast evaporation rate. Perfect for use on fiber optics. General all-purpose cleaner. Carb compliant categories & Limit: Electronic Cleaners 75%. Carb compliant. Also available in pen format 801C-P. Applications: cleaner for electronic controls dials, potentiometers, tuners, switches, etc.

Protects gold for life. Suitable for use in food facilities as a Non-Food Chemical-Canadian and NFS recognition letters available on request. Maximum service temperature of 200 ºC 392 ºF. Zero residue, Fast evaporation rate.

WD40 Company 300554 Specialist Contact Cleaner Spray - 11 oz. with Smart Straw

Shut off power and allow any hot surfaces to cool. Non-conductive. Carb compliant categories & Limit: Electronic Cleaners 75%. Low toxicity. Blast away oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment with pinpoint precision. Safe on most plastics. Wd-40 specialist line is designed with industrial strength quality and extreme penetration for your hard to solve issues.

Perfect for use on fiber optics. Plastic safe-compatible with most sensitive substrate used in electronic parts and enclosures. Non-aggressive - safe for use on vintage electronics. Static free, safe on most plastics. Also available in pen format 801C-P. The wd-40 specialist product line has been refined to perfection so you get the results you need with ease.

Maximum service temperature of 200 ºC 392 ºF. Safe to use on all plastics, rubber, and metal. Directions:1. Quickly dissolves burnt on flux. Flip straw up for pinpoint stream or DOWN for wide angle spray4. How to usewd-40 specialist electrical contact Cleaner Spray cleans oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment without leaving residue.



Stabilant 22, 5ml Kit Makes 30ml of 22A - 22

The wd-40 specialist product line has been refined to perfection so you get the results you need with ease. Maximum service temperature of 200 ºC 392 ºF. It has been in some applications for more than fifteen years without renewal, and it is probably safe to say that in the majority of cases, the Non-conductive.

Safe on plastics. It has a very low vapor pressure and therefore there is no appreciable loss of material from evaporation. Applications: electrical and electronics contact cleaner that leaves a protective layer against corrosion. Tenfold to one hundred-fold increases are not unusual. Electrical contact cleaner spray.

Safe on most plastics. Rohs Compliant. Wd-40 specialist electrical contact cleaner spray is ideal for removing oil, dirt, and condensation from sensitive electrical equipment. 99. 9 percent pure anhydrous. Non-conductive. Zero residue, Fast evaporation rate. Quickly dissolves burnt on flux. Contains electronic grade mineral oil.



CAIG LABORATORIES D100L-25C Contact Cleaner

Fast evaporation rate. Caig laboratories d100l-25c 25ml contact Cleaner. This precise and specific formula is safe to use on plastic, rubber, and metal. Contains electronic grade mineral oil. It's ideal for use on printed circuit boards, switches, controls, precision instruments and electric panels. Safe to use.

It is definitely a great quality product. Maximum service temperature of 200 ºC 392 ºF. Quickly dissolves burnt on flux. Non-conductive. General all-purpose cleaner. Also available in pen format 801C-P. Use for cleaning and lubricating electronic controls dials, potentiometers, tuners, switches, etc. Wd-40 specialist offers easy solutions for specific problems.

This quick drying, flux residue, residue-free formula is safe on metal and plastic. Task specific solution. Blast away debris. Recommended by VW. Carb compliant categories & Limit: Electronic Cleaners 75%. Zero residue, Fast evaporation rate.

ChemtronicsES835B Flux Remover, Brush, 5 fl.oz.

Suitable for use in food facilities as a Non-Food Chemical-Canadian and NFS recognition letters available on request. Applications: electrical and electronics contact cleaner that is safe on plastics that leaves a protective anticorrosion layer. Applications: cleaner for electronic controls dials, potentiometers, switches, tuners, etc.

Protects gold for life. Safe on plastics. General all-purpose cleaner. Perfect for use on fiber optics. Non-conductive. Fast evaporation rate. Fast acting deoxidizing solution. Price for: each cleaner type: flux remover cleaner applications: electrical/ electronics/ heat sinks/ pcbs. Suitable for use in food facilities as a Non-Food Chemical-Canadian and NFS recognition letters available on request.

Blast away debris. Plastic safe-compatible with most sensitive substrate used in electronic parts and enclosures. Carb compliant categories & Limit: Electronic Cleaners 75%. The flux-off rosin formulation is a fast drying aerosol that quickly and completely removes R, RMA, RA, and synthetic flux residue. It's ideal for use on printed circuit boards, switches, controls, precision instruments and electric panels.