Lisle 65150 Flexible Back Probes

Flexible silicone Probe Bends for Hard-to-Reach Areas. For use up to 30 volts. The probes are fully insulated which provide added protection and come with standard 4mm female banana plug connections. Great for harness Connectors and Sensor Wiring. No need to disconnect the terminal and connector.


Tool Aid SG 23500 Back Probe Kit

12" extension leads quickly plug in to permit testing in recessed areas, compatible with standard 4mm plug. Probes easily insert into automotive connectors. Stainless steel, straight, 45 and 90 degree probes in. 027" and. 040" diameters. M10x1. 0 flare nut European/Domestic 4 pack. Insulated body for testing up to 30 volts.

Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors.


General Technologies Corp GTC063 Fuse Socket Connector Kit

The easy access connector tabs are designed to be used with 1/4" or 0205" quick connects, jumper leads, alligator clips, or Multimeter test leads. Easy access connector tabs fit 1/4" and 0205" quick-connects, jumper leads, alligator clips, and multimeter test leads. Nickel-plated contacts for maximum conductivity and durability.

Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors. These connectors can be used in the testing of cooling fans, power window motors, Electric fuel pumps, radios, wiring harnesses, Relays, Electric doors, lamps, cd players and stereo power lines and any component or Module wired or connected to the car or vehicle's fuse box.

Ergonomically molded connector for easy insertion and extraction. Stainless steel, straight, 45 and 90 degree probes in. 027" and. 040" diameters. The gtc063 fuse socket connector kit consists of six different connectors. 12" extension leads quickly plug in to permit testing in recessed areas, compatible with standard 4mm plug.

These specially designed, plastic encapsulated connectors provide quick and reliable access to the fuse block circuits for testing voltages, currents and for tapping into the power line without damaging the fuse block or wiring in the vehicle. Tap power for cooling fans, electric fuel pump, power window, lamps relays, motors electric doors, wiring harnesses etc.




OTC 3633 Mini-Coil Cord Circuit Tester

12" extension leads quickly plug in to permit testing in recessed areas, compatible with standard 4mm plug. It is useful in testing electrical circuits and locating shorts, grounds, and open circuits. Ergonomically molded connector for easy insertion and extraction. Tap power for cooling fans, power window, motors electric doors, electric fuel pump, lamps relays, wiring harnesses etc.

Selectively enable or disable circuits for custom applications, taxis, such as emergency vehicles, or service vehicles. Small handle with needlepoint stainless steel probe allows easy back probing and piercing. Probes easily insert into automotive connectors. Useful in testing electrical circuits and locating shorts grounds and open circuits.

Easy access connector tabs fit 1/4" and 0205" quick-connects, jumper leads, alligator clips, and multimeter test leads. Nickel-plated contacts for maximum conductivity and durability. Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors. It features 12 feet heavy-duty red coil cord lead, bright red high intensity/slim style replaceable bulb, checks 6- and 12-volt systems, positive contact-molded strain relief, ergonomic slim designed clear handle, heavy-duty stainless steel probe with insulated shaft and heavy-duty clip with positive soldered connection.

Insulated body for testing up to 30 volts. Special threaded probe comes with screw on alligator clip for additional versatility.


Power Probe Lead Set PPLS01 Car Diagnostic Test Tool, Self-Centering Piercing Probes, Super Flexible Multi-Strand Wires, Gold Plated Connectors

Stainless steel, straight, 45 and 90 degree probes in. 027" and. 040" diameters. Easy access connector tabs fit 1/4" and 0205" quick-connects, alligator clips, jumper leads, and multimeter test leads. Nickel-plated contacts for maximum conductivity and durability. Super flexible 10 gauge leads that are 1 feet, 3 feet and 6 feet stackable.

Useful in testing electrical circuits and locating shorts grounds and open circuits. High current 4 millimeter shrouded banana plugs and jacks. Complete gold series lead set with Adapters to Fit, to Extend and to Reach for Unsurpassed Connectivity. 2 auto centering wire piercing probes. Probes easily insert into automotive connectors.

Features 12 feet heavy-duty red coil cord lead and checks 6 and 12 volt systems. Dwell measurement and O2 cross counts. 12" extension leads quickly plug in to permit testing in recessed areas, compatible with standard 4mm plug. Ergonomically molded connector for easy insertion and extraction. Male/male and female/female adapters.

Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors. Tap power for cooling fans, electric fuel pump, power window, lamps relays, motors electric doors, wiring harnesses etc.


Lisle 64900 17-Piece Back Probe and Alligator Clip Set

Features 12 feet heavy-duty red coil cord lead and checks 6 and 12 volt systems. High current 4 millimeter shrouded banana plugs and jacks. Easy access connector tabs fit 1/4" and 0205" quick-connects, alligator clips, jumper leads, and multimeter test leads. Nickel-plated contacts for maximum conductivity and durability.

Tap power for cooling fans, electric fuel pump, power window, lamps relays, motors electric doors, wiring harnesses etc. Selectively enable or disable circuits for custom applications, such as emergency vehicles, taxis, or service vehicles. Small handle with needlepoint stainless steel probe allows easy back probing and piercing.

The alligator provides a better way to connect, reducing the chance of a bad reading. 12" extension leads quickly plug in to permit testing in recessed areas, compatible with standard 4mm plug. Super flexible 10 gauge leads that are 1 feet, 3 feet and 6 feet stackable. Alligator clips allow many ways to connect to multimeter probes.

Probes easily insert into automotive connectors. Stainless steel, straight, 45 and 90 degree probes in. 027" and. 040" diameters.


Power Probe PPTK0005 Test Probe Adapter Kit

Useful in testing electrical circuits and locating shorts grounds and open circuits. Blade probe allows for terminal testing at fuses, sockets, or Connecters. Tap power for cooling fans, power window, electric fuel pump, lamps relays, motors electric doors, wiring harnesses etc. Selectively enable or disable circuits for custom applications, such as emergency vehicles, taxis, or service vehicles.

Small handle with needlepoint stainless steel probe allows easy back probing and piercing. Able to test and back Probe sensors, components, connectors, and more. Insulated body for testing up to 30 volts. Probes easily insert into automotive connectors. 4mm banana plugs. 2 auto centering wire piercing probes. Male/male and female/female adapters.

High current 4 millimeter shrouded banana plugs and jacks. Ergonomically molded connector for easy insertion and extraction. Back probe terminals without damaging the component. Easy access connector tabs fit 1/4" and 0


Power Probe PPT5VA RED Adapter5v

Insulated body for testing up to 30 volts. 4mm banana plugs. Blade probe allows for terminal testing at fuses, sockets, or Connecters. Back probe terminals without damaging the component. Allows for pinpoint diagnostic testing. Reduces the power Probe tip battery voltage to 5V and limits the current output. Useful in testing electrical circuits and locating shorts grounds and open circuits.

Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors. Special threaded probe comes with screw on alligator clip for additional versatility. Dwell measurement and O2 cross counts. 2 auto centering wire piercing probes. The 5v adapter is an accessory that is compatible with all Power Probes that reduces the Power Probe tip voltage from battery voltage to 5 Volts DC.

Ergonomically molded connector for easy insertion and extraction. Easy access connector tabs fit 1/4" and 0205" quick-connects, jumper leads, alligator clips, and multimeter test leads. Nickel-plated contacts for maximum conductivity and durability. Male/male and female/female adapters.


Automotive Diagnostic Test Accessories Repair Tools Needle/Back Probe kitSet of 4 - Insulation Wire Piercing Probes

Ergonomically molded connector for easy insertion and extraction. Useful in testing electrical circuits and locating shorts grounds and open circuits. It is a maintenance tool for automotive diagnostic testing, and?it is?a back-test weather pack connector for many automotive sensors. We have improved the cover of this product.

Male/male and female/female adapters. Insulated body for testing up to 30 volts. 4mm banana plugs. Super flexible 10 gauge leads that are 1 feet, 3 feet and 6 feet stackable. Great for back probing weather pack style connectors used with numerous automotive sensorsAlso very handy for piercing and tapping readings on smaller gauge wires - using the included probe adaptersWorks with most Test Lead Kits in the field - with standard 4mm banana plug test leadTest probes 21 mm length Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors.

Reduces the power Probe tip battery voltage to 5V and limits the current output. 17 piece set will include probes that will work with 0027 inch wire, 3 yellow straight, 45 degree, 3 green straight, and 90 degree, 3 red straight, 45 degree, 45 degree, and 90 degree, and 2 black alligator clips. Kit also includes 2 set of probes that will work with 0

040 inch wire, 1 blue straight, and 1 black straight, 45 degree and 90 degree, 45 degree and 90 degree. Back probe and blade Probe adapters.


ESI 307M Fuse Buddy Mini Current Loop

Ergonomically molded connector for easy insertion and extraction. It has passed uL certification, and we are applying patent?for it. Size: the length is 80mm, and it can be used?for wires below 4mm diameter. Two use modes - no need to strip the wires and it won't damage the wires. Just clamp your current probe over the loop to access the amperage draw through a fused circuit.

17 piece set will include probes that will work with 0027 inch wire, 3 red straight, and 90 degree, 45 degree, 3 yellow straight, and 90 degree, 3 green straight, 45 degree, 45 degree, and 2 black alligator clips. Kit also includes 2 set of probes that will work with 0040 inch wire, 1 blue straight, and 1 black straight, 45 degree and 90 degree, 45 degree and 90 degree.

Back probe and blade Probe adapters. 2 auto centering wire piercing probes. Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors. Stainless steel, straight, 45 and 90 degree probes in. 027" and. 040" diameters. Useful in testing electrical circuits and locating shorts grounds and open circuits.




Power Probe PPPPSET Piercing Probe Set

Self centering & Adjustable. Stainless steel, straight, 45 and 90 degree probes in. 027" and. 040" diameters. 6. 5" & 7. 5" probe Tip. Easy access connector tabs fit 1/4" and 0205" quick-connects, alligator clips, jumper leads, and multimeter test leads. Nickel-plated contacts for maximum conductivity and durability.

It has passed uL certification, and we are applying patent?for it. Size: the length is 80mm, and it can be used?for wires below 4mm diameter. Two use modes - no need to strip the wires and it won't damage the wires. Male/male and female/female adapters. Back probe terminals without damaging the component. 12" extension leads quickly plug in to permit testing in recessed areas, compatible with standard 4mm plug.

Reduces the power Probe tip battery voltage to 5V and limits the current output. 4mm standard Banana Jack and Plug Fittings. Probes easily insert into automotive connectors. Testing range 0-30 amperes, do not exceed 30 amperes. Safely simulate sensor reference voltages and outputs without damaging components.

17 piece set will include probes that will work with 0