Lisle 41250 Push Pin Pliers

#ad
Lisle 41250 #ad - Pointed pliers tips will not damage the pin or anchor. The tool is only 7-1/2" long to fit in tight spaces. For easy removal of plastic Push Pin Type Panel Fasteners with Center Pins.

#ad



Lisle 22100 Flywheel Locking Tool for 6.6L Duramax

#ad
Lisle 22100 #ad - Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place. Package dimension is 4. 5 inches width by 5 inches height by 2 inches depth.

On 4500 and 5500 trucks, remove the rubber inspection cap on the bottom of the transmission. Locks flywheel in place when removing harmonic balancer on 6. 6l duramax engines with Allison automatic transmissions. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel.

Lisle 22100 Flywheel Locking Tool for 6.6L Duramax #ad - Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation. Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation. Package dimension is 4. 5 inches width by 5 inches height by 2 inches depth. Locks flywheel in place when removing harmonic balancer on 6.

6l duramax engines with Allison automatic transmissions. On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission.

#ad



Lisle 42430 Push Pin Plier 80 Degree

#ad
Lisle 42430 #ad - Locks flywheel in place when removing harmonic balancer on 6. 6l duramax engines with Allison automatic transmissions. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells.

Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation. For easy removal of plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. Handles have a double dip grip. Package dimension is 4. 5 inches width by 5 inches height by 2 inches depth.

Lisle 42430 Push Pin Plier 80 Degree #ad - Designed to prevent damage to the pin or anchor.

#ad



Lisle 35260 Plastic Fastener Remover

#ad
Lisle 35260 #ad - Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Locks flywheel in place when removing harmonic balancer on 6. 6l duramax engines with Allison automatic transmissions. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells.

Removes plastic Hold-Down Fasteners. Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation. Package dimension is 4. 5 inches width by 5 inches height by 2 inches depth. Designed to prevent damage to the pin or anchor. Handles have a double dip grip. The tool is equipped with a sliding urethane button for use when extra leverage is necessary.

Lisle 35260 Plastic Fastener Remover #ad - Removes plastic Hold-Down Fasteners. This tool quickly removes various types of plastic fasteners that hold on weather stripping, fender linings, radiator shrouds, air dams and other plastic or rubber parts. The tool is equipped with a sliding urethane button for use when extra leverage is necessary. This tool quickly removes various types of plastic fasteners that hold on weather stripping, radiator shrouds, fender linings, air dams and other plastic or rubber parts.

#ad



ACDelco 252-838 Professional Water Pump Kit

#ad
ACDelco 252-838 #ad - Coated seals support seal longevity and durability. Acdelco professional water Pumps are the high quality replacement ideal for many vehicles on the road today. An acdelco professional, premium aftermarket Engine Water Pump circulates coolant through your vehicle’s radiator and engine system to help maintain proper engine temperature and performance.

Package dimension is 4. 5 inches width by 5 inches height by 2 inches depth. Locks flywheel in place when removing harmonic balancer on 6. 6l duramax engines with Allison automatic transmissions. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. The gaskets, seals, and o-rings packaged with this Professional, premium aftermarket water pump help guarantee that all necessary parts are available for trouble-free installation.

ACDelco 252-838 Professional Water Pump Kit #ad - Removes plastic Hold-Down Fasteners. This tool quickly removes various types of plastic fasteners that hold on weather stripping, fender linings, radiator shrouds, air dams and other plastic or rubber parts. The tool is equipped with a sliding urethane button for use when extra leverage is necessary. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.

. Designed to prevent damage to the pin or anchor.

#ad



Lisle 47900 Hose Remover Pliers

#ad
Lisle 47900 #ad - All makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles. Package dimension is 4. 5 inches width by 5 inches height by 2 inches depth. Designed to prevent damage to the pin or anchor. Removes plastic Hold-Down Fasteners. This tool quickly removes various types of plastic fasteners that hold on weather stripping, fender linings, radiator shrouds, air dams and other plastic or rubber parts.

The tool is equipped with a sliding urethane button for use when extra leverage is necessary. Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation. Locks flywheel in place when removing harmonic balancer on 6. 6l duramax engines with Allison automatic transmissions.

Lisle 47900 Hose Remover Pliers #ad - This sharpened jaw actually "digs" into the tube to grip it squeeze and the hose is easily pushed off by the silver jaw. For easy removal of 5/32" to 1/2" vacuum and fuel hoses engage the tube line with the black jaw. Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies.

For easy removal of 5/32" to 1/2" vacuum and fuel hoses. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Thoroughly tested for reliable, leak-free performance.

#ad



Lisle 42420 Push Pin Plier 30 Degree

#ad
Lisle 42420 #ad - Thoroughly tested for reliable, leak-free performance. Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation. Removes plastic Hold-Down Fasteners. This tool quickly removes various types of plastic fasteners that hold on weather stripping, fender linings, radiator shrouds, air dams and other plastic or rubber parts.

The tool is equipped with a sliding urethane button for use when extra leverage is necessary. Locks flywheel in place when removing harmonic balancer on 6. 6l duramax engines with Allison automatic transmissions. Designed to prevent damage to the pin or anchor. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells.

Lisle 42420 Push Pin Plier 30 Degree #ad - All makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles. High-quality bearings are permanently sealed and lubricated for greater durability and long life. Coated seals support seal longevity and durability. Handles have a double dip grip. Designed to prevent damage to the pin or anchor.

Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies.

#ad



GOOACC GRC-13 25 Push Type Retainer GM 21030249 Ford N807389S

#ad
GOOACC GRC-13 #ad - Coated seals support seal longevity and durability. All makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles. Stem length: 20mm. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. Designed to prevent damage to the pin or anchor. Removes plastic Hold-Down Fasteners.

This tool quickly removes various types of plastic fasteners that hold on weather stripping, fender linings, radiator shrouds, air dams and other plastic or rubber parts. The tool is equipped with a sliding urethane button for use when extra leverage is necessary. Head diameter: 20mm. Engage the tube line with the black jaw.

GOOACC GRC-13 25 Push Type Retainer GM 21030249 Ford N807389S #ad - This sharpened jaw actually "digs" into the tube to grip it squeeze and the hose is easily pushed off by the silver jaw. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. High-quality bearings are permanently sealed and lubricated for greater durability and long life.

Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Designed to prevent damage to the pin or anchor. For easy removal of 5/32" to 1/2" vacuum and fuel hoses.

#ad



Lisle 22110 Flywheel Lock

#ad
Lisle 22110 #ad - For more information check the main Lisle tool- 22100 The tool is only 7-1/2" long to fit in tight spaces. Handles have a double dip grip. Removes plastic Hold-Down Fasteners. This tool quickly removes various types of plastic fasteners that hold on weather stripping, radiator shrouds, fender linings, air dams and other plastic or rubber parts.

The tool is equipped with a sliding urethane button for use when extra leverage is necessary. Head diameter: 20mm. High-quality bearings are permanently sealed and lubricated for greater durability and long life. Coated seals support seal longevity and durability. Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.

Lisle 22110 Flywheel Lock #ad - Fits into 5/16" 8mm hole. Stem length: 20mm. For easy removal of 5/32" to 1/2" vacuum and fuel hoses. Designed to prevent damage to the pin or anchor. Gm saturn 2 door & 4 door models. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Replacement part for Lisle tool- 22100

#ad



KINGLAKE Multi-function Diagonal Side Cutting Plier Car Trim Panel Clip Cutter Puller Fastener Rivets Remover

#ad
KINGLAKE TRTAZ11A #ad - For easy removal of 5/32" to 1/2" vacuum and fuel hoses. 100% customer Satisfaction Guarantee. Head diameter: 20mm. Designed to prevent damage to the pin or anchor. All makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles. On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission.

Engage the tube line with the black jaw. This sharpened jaw actually "digs" into the tube to grip it squeeze and the hose is easily pushed off by the silver jaw. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. Designed to prevent damage to the pin or anchor.

KINGLAKE Multi-function Diagonal Side Cutting Plier Car Trim Panel Clip Cutter Puller Fastener Rivets Remover #ad - Coated seals support seal longevity and durability. High-quality bearings are permanently sealed and lubricated for greater durability and long life. For more information check the main Lisle tool- 22100 Blue or red color shipped randomly. Handles have a double dip grip. Plastic coated Handle, Comfortable to use.

Durable high-quality Carbon Steel, will not break or bend easily. Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies.

#ad



40PCS - GOOACC Nylon Bumper Fastener Rivet Clips Automotive Furniture Assembly Expansion Screws Kit Auto Body Clips 8mm

#ad
Znder Inc 40pcs Clips #ad - Gm saturn 2 door & 4 door models. Thoroughly tested for reliable, leak-free performance. For easy removal of 5/32" to 1/2" vacuum and fuel hoses. Stem length: 20mm. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. The tool is only 7-1/2" long to fit in tight spaces.

Replacement part for Lisle tool- 22100 Sturdy and durable: made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use. Push in type, easy to fasten Bumper Fender Flare and Mud Flap. Locks flywheel in place when removing harmonic balancer on 6. 6l duramax engines with Allison automatic transmissions.

40PCS - GOOACC Nylon Bumper Fastener Rivet Clips Automotive Furniture Assembly Expansion Screws Kit Auto Body Clips 8mm #ad - Multiple use: widely used for door trim, side skirt, radiator shield yoke, fender, bumper, grille, engine cover and splash shield retainers. Product size: head diameter: 20mm/ 08 inches; stem Length: 22. 8mm/09 inches; fits Into: 8mm /03 inches hole. Fits into 5/16" 8mm hole.

#ad