Thickness: 1/16 inch. Diameter: #2. We stock a wide variety of fasteners ideal for many applications arround the home, business, farm, automotives, and in industry. Finish: Zinc. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

. Thread type: 56 Coarse. Driver type: 3/16 wrench. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Most of our fasteners have a light Zinc plating over steel giving a more rust resistant finsh.

Material: Steel.

Du-Bro 360 2-56 Tap And Drill Set

Innovation and reliability has been synonymous with DU-BRO for all these years and coupling that with great customer service and a knowledgeable, helpful staff, has made DU-BRO a staple line in all the industries they have taken on. During that time, offering more than 1, to 4 companies in three industries, the company has grown from a single product, 200 items.

Since 1959, the broberg family has owned and operated DU-BRO Products, Inc. High quality steel Tap and Drill set.

#2-56 UNC Phillips Pan Head Machine Screws Assortment Kit,Stainless Steel,Full Thread,10 Size 200 piece

Thread diameter: #2thread pitch: 56 per inch coarsethread direction: right handmaterial: stainless steelkit contains:#2-56 x 1/8 20-piece#2-56 x 5/32 20-piece#2-56 x 3/16 20-piece#2-56 x 1/4 20-piece#2-56 x 5/16 20-piece#2-56 x 3/8 20-piece#2-56 x 1/2 20-piece#2-56 x 5/8" 20-piece#2-56 x 3/4 20-piece#2-56 x 1" 20-piece High quality steel Tap and Drill set.

Machine screws from fastener Express are very high quality and we have them in stock and ready to shipping. We carry stainless, Steel, Brass and plated machine screws. We have many different head and drive styles to choose from Pan Phillips, flat phillips and many miniature machine screws, hex head machine screws and many more.

. If you need machine screws that can visit on our amazon store. Thread diameter: #2; Thread Pitch: 56 Per Inch. 2-56 pan head Machine Screws. Standard: ANSI. Pack quantity: 200, 10 of Size. Drive Style: Phillips.

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #2-56 Thread Size, 1/2" Length, Fully Threaded, Import Pack of 100

Drive Style: Phillips. 2-56 pan head Machine Screws. High quality steel Tap and Drill set. They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped threaded holes.

Pack quantity: 200, 10 of Size. Standard: ANSI. Thread diameter: #2; Thread Pitch: 56 Per Inch.

410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, #2-56 Thread Size, 1/4" Length Pack of 100

The 410 stainless steel thread cutting screw has a plain finish, a Type F point style, and a pan head with a Phillips drive. Thread diameter: #2; Thread Pitch: 56 Per Inch. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, cast iron, aluminum, brass, and plastic.

410 stainless steel has high strength and hardness, and resists corrosion in mild environments. Pan head has a flat top and short vertical sides with a rounded top edge. 2-56 pan head Machine Screws. The pan head has a flat top and short vertical sides with a rounded top edge. The material is magnetic. The type f point is suitable for heavy gauge sheet metal, cast iron, aluminum, brass, and plastic.

Drive Style: Phillips. The 410 stainless steel material offers high strength and hardness, and resists corrosion in mild environments. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. High quality steel Tap and Drill set.

Plain surface has no finish or coating. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

2-56 x 1" Pan Head Machine Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Machine Thread, Quantity 100 Pieces By Fastenere

Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, brass, cast iron, and plastic.410 stainless steel has high strength and hardness, and resists corrosion in mild environments. Phillips Drive Size #1. High quality steel Tap and Drill set.

Head height 0063". Thread diameter: #2; Thread Pitch: 56 Per Inch. Pan head has a flat top and short vertical sides with a rounded top edge. Drive Style: Phillips. Head diameter 0167". Machine screws have machine threads for use with a nut or in a tapped hole. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

Standard: ANSI. Thread diameter 0086". 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. Plain surface has no finish or coating.

2-56 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere

High quality steel Tap and Drill set. 2-56 pan head Machine Screws. For example, carroll smith carroll smith's nuts, bolts, and plumbing handbook notes that the nylon insert is not damaged by installation and therefore they can be reused many times, Fasteners, and a Federal Aviation Administration Advisory Circular allows nuts to be reused if the prevailing torque is within specification.

Height 9/64". Head height 0063". Thread diameter 0086". Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.

Thread diameter: #2; Thread Pitch: 56 Per Inch. It is a nut with a nylon collar insert that resists turning. Authorities disagree on whether nyloc nuts should be reused. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the applied radial compressive force.

18-8 stainless steel provides strength and offers good corrosion resistance in many environments. For use with an externally threaded item that measures 0

2-56 x 3/4" Pan Head Machine Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Machine Thread, Quantity 100 Pieces By Fastenere

Machine screws have machine threads for use with a nut or in a tapped hole. Head diameter 0167". Plain surface has no finish or coating. Drive Style: Phillips. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. Pan head has a flat top and short vertical sides with a rounded top edge.

Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance. Thread diameter 0086".

Thread diameter: #2; Thread Pitch: 56 Per Inch. 2-56 pan head Machine Screws. Head height 0063". Thread diameter 0086". Pack quantity: 200, 10 of Size. Head diameter 0167".

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #1 Phillips Drive, #2-56 Thread Size, 3/4" Length, Fully Threaded, Import Pack of 100

Thread diameter: #2; Thread Pitch: 56 Per Inch. High quality steel Tap and Drill set. Head height 0063". Head diameter 0167". Pan head has a flat top and short vertical sides with a rounded top edge. Hex socket Drive 1/4". Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped threaded holes.

Height 9/64". Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, brass, cast iron, and plastic.410 stainless steel has high strength and hardness, and resists corrosion in mild environments. 2-56 pan head Machine Screws.

Plain surface has no finish or coating. Standard: ANSI. Pack quantity: 200, 10 of Size. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. For use with an externally threaded item that measures 0086 inch and has 56 threads per inch. Width measured From Flat to Flat 1/4".

They are available with a variety of head shapes, and drive styles, which determine how the screw interacts with the mating surface, which determine the type of driver required to install and remove the screw.

Steel Machine Screw, Zinc Plated Finish, Flat Head, Phillips Drive, 3/8" Length, #2-56 Threads Pack of 100

Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance. Thread diameter 0086".

Thread diameter: #2; Thread Pitch: 56 Per Inch. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Phillips Drive Size #1. Head diameter 0167". Phillips Drive Size #1. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

Hex socket Drive 1/4". Thread diameter 0086". Pan head has a flat top and short vertical sides with a rounded top edge. Head height 0063". Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 1/2" Length, Fully Threaded, Import Pack of 100

18-8 stainless steel provides strength and offers good corrosion resistance in many environments. For use with an externally threaded item that measures 0086 inch and has 56 threads per inch. Width measured From Flat to Flat 1/4". Thread diameter: #2; Thread Pitch: 56 Per Inch. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments.

Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. 2-56 pan head Machine Screws. Hex socket Drive 1/4". Height 9/64". Zinc plating resists corrosion resistance and has a reflective appearance.

Head diameter 0167". Phillips Drive Size #1. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Standard: ANSI.